Error Code 286 - CR805 Tactile Impression Module

TIM supply write error. The impresser supply information was not updated properly. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Drive...

Error Code 281 - Sigma Tactile Impression Module

Impresser heater error. The impresser has encountered a critical error. 1. Press the printer POWER button to power off the system. 2. Request service. The system must remain powered off. 3. Click OK t...

Error Code 284 - Sigma Tactile Impression Module

Impresser drive error. The impresser die motor has an error. 1. Open the impresser door. 2. Make sure that the card or foil is not stuck to the die. 3. Cancel the job. 4. If the issue continues to occ...

Error Code 289 - CR805 Tactile Impression Module

Impresser error. An unexpected error has occurred in the impresser. Power off and restart the printer.If the error occurs again, request service.In the Card Printer Driver message, click Retry, or cli...

Error Code 288 - CR805 Tactile Impression Module

Impresser not detected. The printer cannot communicate with the impresser. Power off and restart the printer.If the error occurs again: Power off and unplug the printer and impresser.Open the impresse...

Error Code 292 - CR805 Tactile Impression Module

Impresser card jam. The card is not in position in the impresser. 1. Power off and unplug the printer and impresser. 2. Open the impresser and remove the supply cassette. 3. Remove the impresser from ...

Error Code 106 - CE840, CE870, CE875, DS4-ES1

Magstripe data not found. The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are ...

Error Code 241 - CE840, CE870, CE875, DS4-ES1

C1 supply type error. The C1 ink ribbon does not support an action requested by this print job. Use a supply designed for this printer model.

Error Code 142 - Embosser

Emboss cover error. The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked.

Error Code 231 - CR805, CR805 CLM, CR825, CR825 FCP

C2 heated roller motion error. The C2 retransfer heated roller has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The ...

知识库系统