Error Code 296 - CR805, CR825, CE875

MH cassette is missing. 1. Unlock the multi-hopper if locks are installed. 2. Install the missing cartridge. 3. Lock the multi-hopper if locks are installed.

Error Code 278 - CE840, CE870

Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...

Error Code 288 - Sigma Tactile Impression Module

Impresser not detected. The printer cannot communicate with the impresser. Power off and restart the printer.If the error occurs again: Power off and unplug the printer and impresser.Open the impresse...

Error Code 281 - CR805 Tactile Impression Module

Impresser heater error. The impresser has encountered a critical error. 1. Press the printer POWER button to power off the system. 2. Request service. The system must remain powered off. 3. Click OK t...

Error Code 292 - Sigma Tactile Impression Module

Impresser card jam. The card is not in position in the impresser. 1. Power off and unplug the printer and impresser. 2. Open the impresser and remove the supply cassette. 3. Remove the impresser from ...

Error Code 289 - Sigma Tactile Impression Module

Impresser error. An unexpected error has occurred in the impresser. Power off and restart the printer.If the error occurs again, request service.In the Card Printer Driver message, click Retry, or cli...

Error Code 293 - Sigma Tactile Impression Module

Impresser door open. The impresser door is open. Close the door to continue. Press the USER button on the printer to clear the message.In the Card Printer Driver message, click Retry, or click Cancel ...

Error Code 284 - CR805 Tactile Impression Module

Impresser drive error. The impresser die motor has an error. 1. Open the impresser door. 2. Make sure that the card or foil is not stuck to the die. 3. Cancel the job. 4. If the issue continues to occ...

Error Code 283 - CR805 Tactile Impression ModuleCR805

Impresser foil error. The impresser foil is not moving properly. Open the impresser door.Make sure that the foil is not broken; stuck to the card, impresser die, or the rollers; or prevented from movi...

Error Code 291 - Sigma Tactile Impression Module

Impress foil not supported. The impresser cannot use the installed foil. Use a supply designed for this impresser. Press the USER button on the printer to clear the message.In the Card Printer Driver ...

知识库系统