Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the top...
Indent ribbon supplies out. The embosser does not have usable indent ribbon. 1. Open the embosser and remove the indent ribbon cartridge. 2. Install a new indent ribbon. 3. Replace the cartridge, and ...
Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the emb...
Embosser card entry jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, and then close and lock ...
Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper Open the input hopper.Add or reposition cards. Close the hopper. For printers with sin...
LCM fan problem. The LCM has detected a problem with a cooling fan. 1. Power off and unplug the printer and LCM. 2. Inspect enclosure fan to make sure it is not obstructed. 3. Plug in the power cords ...