Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or cli...
Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...
Magstripe data not found. The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are ...
Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...