Impresser problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powered off...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...
Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.
Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.
Laminator system mismatch. The printer and laminator are not compatible. The laminator is not supported by your printer model. Contact your service provider for the correct laminator model.
Firmware version mismatch. The printer and attached component firmware versions are not compatible. The system cannot process cards until the firmware has been updated. Update both the printer and com...